Introducing Turbo 747 high-performance sawmill blades! Available in SilverTip and DoubleHard material, Turbo 747 blades feature a deep capacity gullet, extreme back angle, and sharp penetrating points making it the sharpest blade on the market. Only available from Wood-Mizer, try the Turbo 747 sawmill blades on everything you saw.
Please enter a valid length between 144"-340"
Enter Your Blade Length (144"-340")
Starting at $23.25
Please enter a valid length between 125"-400"
Enter Your Blade Length (125" - 400")
Starting at $15.69
Choose a Brand
*Blade selections and availability vary by profile. Contact us to order custom blades.
Understanding sawmill blade geometry And terminology can be complex. Here Is a crash course In choosing a blade profile that Is best suited For your sawing application.
Eliminate downtime And keep sawing With these 10 helpful tips To increase your bandsaw blade life expectancy.
Use Wood-Mizer's resharp® blade sharpening service or your own blade maintenance equipment to ensure your bandsaw blades maintain maximum precision and performance.
When installing a New sawmill blade, make a few cuts at a moderate speed To "break in" the blade. Also, minimize skim cuts When only one side Of the Set tooth Is sawing.
Keep drive belts tight To transmit higher horsepower To the sawmill blade, especially With New belts that need tightened more frequently.
Trees vary In density, which requires different cutting techniques And feed rates. Wood density change As logs dry which makes sawing more difficult.
Lubricating the sawmill blade can lead To higher sawing performance, reduced pitch build up, longer life between blade sharpenings, And overall blade life.
Dirt, rocks, sand, and other foreign material that may be In the log will wear the teeth considerably faster. A debarker can help With this.
Periodically check hydraulic tensioners, air bags, And springs, because proper tension Is critical For maximum blade performance And cutting speeds.
The blade wheel belts must be In good condition To reach peak performance because worn belts can lead To blade tracking problems. Swapping drive side And idle side can extend belt life.
Feed rates should be As fast As possible While still maintaining a straight cut because cutting at slower speeds reduces overall bandsaw blade life.
If the blade guides are tipped upward Or downward, they will cause the blade To cut In the same direction. Keep rollers tight And make sure the blade Is Not continuously contacting the back guide Or roller flange.