PC200 Single End Pallet Trim Saw

Starting at $14,600

Call 765.228.6775 to Order

Single end power feed pallet trim saw with 10HP electric motor, 21” to 66” long material capacity up to 2” thick and 10” wide, inclined table, overhead blade design, powered variable feed rate, and 4 adjustable board stops with scale.

Single End Power Feed Trim Saw for Wood Pallet Recycling

The PC200 Single End Power Feed Trim Saw is engineered to efficiently trim the ends of deck boards and stringers for manufacturing recycled pallets. Ideal for pallet recycling and remanufacturing operations, the PC200 trims the ends of boards from 21” to 66” long, up to 2” thick and 10” wide at rates of up to 12,000 boards per 8-hour shift. The PC200 features an overhead blade design for reduced board kickback, electronic variable feed speed for optimum production, and a gravity-assist incline feed system for efficient material flow. A typical pallet recycling system will include 2 or 3 Pallet Hawg® Pallet Dismantlers for each PC200 Single End Power Feed Trim Saw in order to dismantle a pallet and trim boards into smaller material for assembly of a recycled pallet.

Operation

With the easy to read scale, four quick-adjust board stops are set from 21” to 66” at the desired board lengths. The operator turns on the blade motor and power feed with a single on/off switch and adjusts the variable feed speed for optimum efficiency. Boards at varying lengths are loaded onto the gravity-assist incline table that includes three heavy-duty #2060 roller feed chains with 12” spacing. The lugs on the chains move boards up the table through the 18” diameter nail-resistant carbide-tipped blade and one end of the board is trimmed. Next to the blade, trim cuts from each board are dropped onto a conveyor system or into a container for recycling. Trimmed boards continue moving up the incline table to the 58” drop height and drop onto a sorting table or into a bin for further processing. Blades are able to be resharpened and changing a blade is easy with the removable blade plate. For added safety features, all chain sprockets are enclosed below the table, two emergency stops are located on the machine, and a convenient reversing switch assists with jammed material.

Built in the USA, the PC200 Single End Power Feed Trim Saw is backed by the same level of service, quality, and safety features shared by the entire family of Wood-Mizer wood processing and pallet recycling equipment.

Features

  • 10HP 1-Phase or 3-Phase Arbor Motor
  • 21” to 66” long material capacity up to 2” thick and 10” wide
  • Inclined table and overhead blade reduces material kickback
  • 3 x heavy-duty #2060 roller feed chains with 12” spacing
  • ½ HP electric power feed motor with gear reduction drive
  • Electronic variable feed speed for optimum production
  • 18” nail resistant carbide-tipped circular saw blade
  • 4 x quick-adjustable board stops with 1” bar and scale
  • Up to 12,000 boards per 8-hour shift production rate
  • Built in the USA

Standard Features

10HP Electric Motor
Single phase and 3-phase electric motor options

21" to 66" Length Capacity
21” to 66” long material capacity up to 2” thick and 10” wide

Gravity-Assist Incline Table
Gravity-assist incline table feed system with 58" drop height for efficient material flow.

Overhead Blade Design
Overhead blade design for reduced board kickback and easy blade changes

18" Diameter Circular Saw Blade
Nail-resistant carbide-tipped saw blade is able to resharpened

Quick-Adjust Board Stops
4 quick-adjust board stops with scale

Heavy-Duty Roller Feed Chains
Three heavy-duty #2060 roller feed chains with lugs and 12" spacing.

1/2 HP Feed Motor
Power feed motor with gear reduction drive

Electronic Feed Control
Variable feed rate controls for optimum production.

Built in Fork Pockets
Two built-in fork pockets to easily move machine around for optimal material flow.

Reversing Switch
Convenient reverse switch assists with jammed material.

Built in the USA
Proudly built in the USA and includes a 1-year limited warranty.

Specifications

Min. Material Length 21"
Max Material Length 66"
Max Material Thickness 2"
Max Material Width 10"
Blade Design Overhead 18" diameter carbide-tipped circular blade
Table Design Gravity-assist inclined with 58" drop height
Board Stops 4 adjustable stops with scale
Feed System 3 x #2060 roller feed chains with lugs and 12" spacing
Feed Speed Variable from 0 - 1 foot/second
Feed Motor 1/2HP with gear reduction
Power 10HP Electric 220V/60Hz 1-Phase
10HP Electric 230V/60Hz 3-Phase
10HP Electric 460V/60Hz 3-Phase

Request Info