HR250 Super Horizontal Resaw

Starting at $19,995

Compact, twin horizontal band resaw with setworks, digital blade height adjustment, 0 - 90 ft/min variable feed, pneumatic hold-down rollers, and 11-1/2" x 10" cant capacity.

Compact Twin Horizontal Resaw with Digital Setworks

Resaw cants and boards into two or three pieces with each pass with the HR250 super horizontal band resaw! Designed for high-production lumber and pallet board operations, the HR250 features two horizontal bandsaw blades within one compact head which is ideal for resawing cants, boards, or stressed material. Powered by two 25HP (18kW) saw wheel motors and two 2HP (.75kW) gear box motors, the HR250 is built to last with heavy-duty construction, premium components, and 28" (710mm) diameter dynamically balanced steel band wheels.


Control panel setworks with digital blade position controls ensure accurate height positioning of the saw wheels when setting cut thickness. Each blade has its own setworks panel and is controlled and run independently using the digital controls or manual up/down buttons. Once the blades are adjusted for the cut, the blade is engaged and material is fed through the machine. Cants and boards up to 11-1/2” wide and 10” high are placed onto the rugged, electric driven conveyor belt with a variable feed adjustment from 0 – 90 feet (0 - 27 meters) per minute for optimal processing of various sized and type of material. Pneumatic hold down rollers and an idle top roller keep material secure as it moves through the machine. Material is continually fed through the machine until processing is complete. Blade tension is automatic and controlled by an air-over-oil hydraulic system in order to maintain proper tensioning for longer blade life.


  • 25HP (18kW) saw wheel motors and 2HP (1.5kW) gearbox motors

  • Two independently controlled saw blades within one compact head

  • Setworks with digital blade position controls in imperial/metric

  • 11 ½” (290mm) wide x 10” (250mm) high capacity

  • 0 – 90 ft/min (0 – 27 m/min) variable feed

  • Pneumatic hold-down top rollers

The HR250 super horizontal band resaw ships on a single pallet, can be set up in 2 – 4 hours, and is easily moved with a forklift for layout flexibility in any production line. With a 1 year warranty, the HR250 resaw is backed by the same level of service, quality and safety features shared by the entire family of Wood-Mizer wood processing equipment.

Standard Operation and Log Handling Features

Steel Belt

Variable Feed Speed
Electric motor drives variable feed speed from 0 to 90 feet/min.

Tilting Cutting Head

Two Saw Blade Configuration
In a single pass, make one or two horizontal cuts to resaw cants and boards within a compact saw head.

Steel Bandwheels

Four Steel Band Wheels
Four 28” (710mm) diameter dynamically balanced steel band wheels are located within one compact saw head.

Steel Belt

Control Panel Setworks with Digital Position Controls
Centralized control panel that features two digital position controls for added convenience when setting cut thickness and displays measurements in either imperial or metric.

Tilting Cutting Head

Powerful Motor Drives
Top and bottom saw wheels are driven by two individual 25HP motors for heavy cutting requirements.

Angled Side Rollers

Adjustable Blade Heights
Setworks ensure accurate height positioning of saw wheels with adjustable upper blade from .8" to 6.75" from conveyor table and lower blade from .2" to 4.3" from conveyor.

Angled Side Rollers

Automatic Blade Tension
Hydraulic cylinder is applied for controlling the blade tension in order to maintain proper tensioning for longer blade life.


Power Selections

230 V/60Hz 3Ph 25HP (18kW)
480 V/60Hz 3Ph 25HP (18kW)

Blade Length 168" (4.2m) 
Blade Width 1-1/4" (32mm)
1-1/2" (38mm)
Cant Length (minimum) 24" (610mm)
Cant Width 1" - 11.5" (25 - 290mm)
Cant Height 0.5" - 10" (13 - 250mm)
Cut Width 1" - 11.5" (25 - 290mm)
Cut Height 0.2" - 6.75" (5 - 170mm)
Blade Wheel Diameter 28" (710mm)
Blade Wheel Type Manual Crank
Conveyor Width 11.25" (285mm)
Feed Speed 0 - 90 ft/min (0 - 27 m/min)
Due to many variables, feed speed will vary
Feed System Power     2HP (0.75kW)
Length 110" (2794mm)
Width 87" (2210mm)
Height 78" (1981mm)
Shop Air Supply 80 - 125 psi @ 5cfm
Weight 3,085 lbs (1,400 kg)
Packing Dimensions Frame     86" x 45" x 83"
(2.2m x 1.1m x 2.1m)
Packing Dimensions Conveyor     113" x 25.25" x 24"
2.87m x .64m x .61m

Request Info