PC200 Power Feed Trim Saw

Single end power feed pallet trim saw with 7.5 kW (10 HP) electric motor, 51 mm to 1.7 m (2" to 66") long material capacity up to 51 mm (2") thick and 254 mm (10") wide, inclined table, overhead blade design, powered variable feed rate, and 4 adjustable board stops with scale

Single End Power Feed Trim Saw for Wood Pallet

The PC200 Single End Power Feed Trim Saw is engineered to efficiently trim the ends of deck boards and stringers for manufacturing recycled pallets. Ideal for pallet recycling and remanufacturing operations, the PC200 trims the ends of boards from 533mm to 1676mm long, up to 51mm thick and 254mm wide at rates of up to 12,000 boards per 8-hour shift. The PC200 features an overhead blade design for reduced board kickback, electronic variable feed speed for optimum production, and a gravity-assist incline feed system for efficient material flow. A typical pallet recycling system will include 2 or 3 Pallet Hawg® Pallet Dismantlers for each PC200 Single End Power Feed Trim Saw in order to dismantle a pallet and trim boards into smaller material for assembly of a recycled pallet.

Operation

With the easy to read scale, four quick-adjust board stops are set from 533mm to 1676mm at the desired board lengths. The operator turns on the blade motor and power feed with a single on/off switch and adjusts the variable feed speed for optimum efficiency. Boards at varying lengths are loaded onto the gravity-assist incline table that includes three heavy-duty #2060 roller feed chains with 305mm spacing. The lugs on the chains move boards up the table through the 457mm diameter nail-resistant carbide-tipped blade and one end of the board is trimmed. Next to the blade, trim cuts from each board are dropped onto a conveyor system or into a container for recycling. Trimmed boards continue moving up the incline table to the 1.3m drop height and drop onto a sorting table or into a bin for further processing. Blades are able to be resharpened and changing a blade is easy with the removable blade plate. For added safety features, all chain sprockets are enclosed below the table, two emergency stops are located on the machine, and a convenient reversing switch assists with jammed material.

Request Info

Frame Tower

7.5 kW (10 HP) Electric Motor
Single phase and 3-phase electric motor options. .

LX25 Controls

Quick-Adjust Board Stops
4 quick-adjust board stops with scale

Engine

Gravity-Assist Incline Table
Gravity-assist incline table feed system with 58" drop height for efficient material flow.

Log Clamp

533 mm to 1.7 m (21" to 66") Length Capacity
533 mm to 1.7 m long material capacity up to 51 mm (2") thick and 254 mm (10") wide.

Log Side Supports

Overhead Blade Design
Overhead blade design for reduced board kickback and easy blade changes

Blade Guide Arm

457 mm Diameter Circular Saw Blade
Nail-resistant carbide-tipped saw blade is able to resharpened

Auto Locking Saw Head

Heavy-Duty Roller Feed Chains
Three heavy-duty #2060 roller feed chains with lugs and 305 mm (12") spacing.

Bed Leveling Feet

0.37 kW (1/2 HP) Feed Motor
Power feed motor with gear reduction drive.

Bed Rails

Electronic Feed Control
Variable feed rate controls for optimum production..

Adjustable Feet

Built in Fork Pockets
Two built-in fork pockets to easily move machine around for optimal material flow..

Loading Ramps

Reversing Switch
Convenient reverse switch assists with jammed material.

 

Features

  • 7.5kW 1-Phase or 3-Phase Arbor Motor
  • 533mm to 1676mm long material capacity up to 51mm thick and 254mm wide
  • Inclined table and overhead blade reduces material kickback
  • 3 x heavy-duty #2060 roller feed chains with 305mm spacing
  • 0.37kW electric power feed motor with gear reduction drive
  • Electronic variable feed speed for optimum production
  • 457mm nail resistant carbide-tipped circular saw blade
  • 4 x quick-adjustable board stops with 1” bar and scale
  • Up to 12,000 boards per 8-hour shift production rate

Specifications

Min. Material Length 533mm
Max Material Length 1676mm
Max Material Thickness 51mm
Max Material Width 254mm
Blade Design Overhead 457mm diameter carbide-tipped circular blade
Table Design Gravity-assist inclined with 1.8m drop height
Board Stops 4 adjustable stops with scale
Feed System 3 x #2060 roller feed chains with lugs and 305mm spacing
Feed Speed Variable from 0 - 305 mm/second
Feed Motor 0.37 kW with gear reduction
Power 7.5kW Electric 220V/60Hz 1-Phase
7.5kW Electric 230V/60Hz 3-Phase
7.5kW Electric 460V/60Hz 3-Phase