- Images
- Videos
Placed in the line behind the TVS, the SVS (Single Vertical Saw) prepares the cant to move on to the resaw.
Placed in the line behind the TVS, the SVS (Single Vertical Saw) prepares the cant to move on to the resaw.
The SVS will make light work of splitting logs at a standard width or for removing the third side from a two sided cant coming off the TVS. Equipped with a standard laser, the operator can position the cant to gain maximum recovery or size for a resaw. The SVS is fitted with infeed and outfeed tables attached to a steel spiked chain that moves material through the blade.
Variable Feed Belt Speed
The spiked steel feed belt carries the cant through the saw at up to 20-40 fpm
15HP Electric Motor
15HP Electric Motor
Laser sight
Align cants for maximum recovery with the standard laser
Designed for Standardisation
Uses the same blade size and many of the same parts as the other machines in the SLP line, facilitating ordering spare parts.
Two Roller Hold-downs
Wide hold-down rollers keep the cant stable during cutting.
| Power Selections | |
|---|---|
| Power Selections | 10HP (7.5kW) Lincoln electric15HP (11kW) electric |
| Blade | |
| Blade Length | 184" (4,670mm) |
| Blade Wheel Diameter | 24" (600mm) |
| Blade Wheel Type | Belted Cast Steel |
| Blade Width | 1 1/4'' - 1 1/2" (32-38mm) |
| Cutting Capacities | |
| Min. Material Length | 35.4" (900 mm) |
| Max. Material Length | 12' (3.6m) |
| Max. Material Width | 16" (400mm) |
| Max. Material Thickness | 10" (250 mm) |
| Min Width of Cut | 0.4" (10mm) |
| Max Width of Cut | 11.7" (.3m) |
| Feed System & Operation | |
| Feed Motor | 1.5HP (1.1 kW) |
| Material Hold-down | Hold-down rollers |
| Alignment Laser | 1 Laser |
| Machine Dimensions & Requirements | |
| Electrical Requirements | 400V 50Hz 3Ph |
| Safety Standards | CE |
| Sawdust collection port diameter | 6" (150mm) |