MR3000 Multirip Edger

Compare
High-Throughput Gang Rip Saw

Our multirips are ideal workhorse machines, producing the majority of finished product in most of our sawmills.

High-Throughput Gang Rip Saw

Our multirips are ideal workhorse machines, producing the majority of finished product in most of our sawmills.

Our gang saws are ideal workhorse machines, producing the majority of finished product in most of our sawmills. The simplicity of our design, coupled with solid construction and plenty of power, produce high throughput and top quality results. Gang saws are capable of making multiple high tolerance cuts in a single pass. Proper alignment of the cant going into the gang saw produces excellent throughput and recovery. Optical sensors detect the presence of material, activating pneumatically assisted driven hold-downs to apply pressure down onto the cant, and guiding the timber accurately through the cut. The high accuracy on board thickness along with the excellent cutting finish achieved by these circular saws result in improved recovery savings further down the line in the dry-milling/ finishing process. This beast of a machine is a must-have in any high volume sawmilling operation.

Features:

  •  Feed speeds up to 197 ft/min (60 m/min)  
  • Compatible for blade sizes: 4" or 5" (100mm or 125mm) 
  • Throat width 17" (430mm)  
  • Single or twin-head configurations 
  • Electric servo sizing system for fast size changes – under 0.3 seconds! (depending on thickness) 
  • Heavy duty slatt-chain feed with variable speed 
  • Powered hold-down rollers on both the in- and out-feeds for fast, accurate material feed 
  • Robust headrig column for high strain, high speed sawmilling 
Anti-Kickback safety system

Double Arbor System

Double arbor system allows for smaller diameter saws and less power for deep cuts.

Top and Bottom Driven Rollers

Specifications
Power Selections
Power Selections 2 x 60HP (45kW) electric
Cutting Capacities
Max. Material Thickness 6" (160 mm)
Blade
Blade Diameter 12 1/2" (320 mm)
Blade Kerf 0.195” (5mm)
Feed System & Operation
Feed Speed 0-130 ft/min
Board Kickback Prevention Anti Kick-back fingers
Material Hold-down Optical Sensor activated Powered Pneumatic Roller Hold-downs
Feed Motor 4HP (3kW)
Scanning Optical Material Scanner System
Operator Controls Stationary Control Station
Feed System Variable Speed Power Feed
Options In-Feed and Out-Feed Tables
Request Info