MR200 Gang Saw

STARTING AT $64,995 

The MR200 Gang Rip Saw increases the productivity of a sawmill operation by significantly reducing the amount of work and time needed to rip cants into boards.

 

High Performance Gang Rip Saw

The MR200 Gang Rip Saw increases the productivity of a sawmill operation by significantly reducing the amount of work and time needed to rip cants into boards. Reliability, accuracy, versatility, and ease of use make the heavy-duty Wood-Mizer MR200 Gang Saw a profitable investment for pallet and lumber production operations.

Capable of ripping cants up to 21” (540mm) wide and up to 7-3/4” (200mm) thick, the MR200 Gang Rip Saw features a compact footprint without sacrificing capacity. Featuring two height adjustable arbors, the MR200 can be equipped with up to 12 circular saw blades on each arbor with a maximum of 18” (460mm) between outer sawblades, significantly speeding up the cant rip sawing operation. Three driven press rollers on both the infeed and outfeed are located close to the saw blades for sawing cants as short as 28” (700mm) and the heavy-duty modular infeed and outfeed tables provide an unlimited cant length capacity with additional 6’ 8” (2m) tables.

Feed speed is adjustable from 5 - 50fpm (1.5 - 15m/min), and the centralized control panel has two separate sets of controls for managing each arbor individually to attain optimal feed speed, energy use, and production. The MR200 is powered by two 40HP (30 kW) motors with ammeters on the control panel monitoring the load of each motor. Other features include a laser line and infeed assist roller for precise alignment and efficient feeding of cants, an optional built-in chipper to prevent unnecessary downtime to clear out sawdust from the machine, and built in forklift pockets allow for easy handling of the machine for layout flexibility.

Features

  • Two Adjustable Arbors with up to 12 Saws Per Arbor

  • Three Driven Press Rollers on Infeed and Outfeed for Effortless Feeding of Cants

  • Control Panel with Individual Controls for Each Arbor

  • Laser Line for Precise Gang Sawing

  • Built-in Chipper

Videos | MR200 Gang Saw

Features | MR200 Gang Saw

Two Adjustable Arbors

Both arbors can move up/down allowing for smaller diameter, thinner kerf saws to be used on thinner material, which means increased efficiency of ripping. Each arbor can be equipped with up to 12 circular saw blades with a maximum of 18” (460mm) between outer sawblades.

Three Driven Press Rolls (Infeed/Outfeed)

Three driven press rollers on both the infeed and outfeed are located close to the saw blades for sawing cants as short as 28” (700mm) and the heavy-duty modular infeed and outfeed tables provide an unlimited cant length capacity with additional 6’ 8” (2m) tables.

Laser Line and Infeed Assist Roller

A laser line and infeed assist roller provide precise alignment and efficient feeding of cants.

Control Panel

Feed speed is adjustable from 5 - 50fpm (1.5 - 15m/min), and the centralized control panel has two separate sets of controls for managing each arbor individually to attain optimal feed speed, energy use, and production. The MR200 is powered by two 40HP (30 kW) motors with ammeters on the control panel monitoring the load of each motor.

Optional Built-in Chipper

Reduces downtime by protecting sawdust chutes from clogging up and forcing operators to stop the machine to clean out wooden chips, offcuts and other debris.

Specifications | MR200 Gang Saw

MODEL MR200
Description Imperial Metric
Power     
Electric 2 x 40HP 2 x 30kW
Cutting Capacity
Max. Material Width 21" 540mm
Max. Width of Cut 18" 460mm
Board Thickness 1-1/4" to 7-3/4" 30mm to 200mm
Circular Blade
Blade Adjustment Manual  
Number of Blades Max. 12 per arbor (depends on material thickness and feed speed)  
Diameter 7-3/4" to 12-1/2" 200mm to 315mm
Feed System
Speed 5 to 50fpm 1.5 to 15m/min
Motor 2HP 1.5kW

 

Request Info