- Images
Three-in-one Jointer Planer and Moulder able to produce tongue and groove paneling, shiplap, trim, and more.
Three-in-one Jointer Planer and Moulder able to produce tongue and groove paneling, shiplap, trim, and more.
Produce tongue and groove paneling, shiplap, trim, and more with the compact three-in-one MP180 Jointer Planer Moulder! The MP180 takes the versatile functionality of the Wood-Mizer MP160 Jointer/Planer and adds a vertical side cutter head to the planer table. Similar to the MP160 Jointer/Planer, the MP180 efficiently shares one horizontal cutter between two cast iron tables to produce straight-edged boards with the top jointer table and evenly planed boards with the bottom planer table. Switching between jointing and planing is done easily by moving the board from one table to the other without needing to adjust the table or stop the cutter or extractor.
When jointing boards on the top table, an adjustable board fence tilts up to 45° and locks into place for angled boards. In addition, the MP180 features one vertical side cutter that can be fitted with moulding profile knives. The vertical side cutter moulds material on one side with each pass through the bottom planer table. With the MP180, moulding material on two sides for profiles like tongue and groove can be completed in only two passes. When planing and moulding boards on the bottom table, two power feed rollers (one steel and one rubber) move the board through the horizontal cutter and vertical side cutter at a variable speed.
The MP180 Jointer Planer Moulder is built to last with heavy duty cast-iron tables, durable sheet steel chassis, and premium components. Proven in workshops throughout the world, the MP180 is backed by the same legendary service, quality and safety features shared by the entire family of Wood-Mizer woodworking equipment.
3-in-1 Jointing, Planing, and Moulding
One horizontal cutter is efficiently shared between two cast iron tables to produce straight-edged boards with the top jointer table and evenly planed boards with the bottom planer table. In addition, one vertical side cutter on the bottom table produces moulding or profiled boards. Switching between jointing, planing, and moulding is done easily by moving the board from one table to the other without needing to adjust the table or stop the cutters or extractor.
Operator panel
Convenient operator unit with controls placed above the in-feed table
Adjustable Table Heights
Both top and bottom table heights are easily adjusted. Adjust the amount of material being removed when jointing on the top table by raising or lowing the in-feed with a simple lever. When planing or moulding on the bottom table, the table height is easily adjusted with a manual hand crank.
Easy adjustment
Ergonomic hand crank for adjusting the height of cast iron table
Compact construction
Possibility of adding a set of caster wheels for transportation
Gravity indicator
Shows the variable feed speed
Material guide bar
With the angle adjustment
Cast iron worktable
Ensures stability and damps vibration during woodworking
Side cutterhead
For moulding and profiling
Three operations in one machine
Combination of a planer, thicknesser and moulder in just one unit helps to save time and boost efficiency
| Feed System | |
|---|---|
| Feed Speed | 16 ft/min (5m/min)6-36 ft/min (2-11m/min) |
| Dimensions & Weight | |
| Length | 1401 mm |
| Width | 954 mm |
| Height | 1222 mm |
| Weight | 310 kg |
| Shipping Weight | 440 kg |
