- Images
High-quality dehumidification wood kiln for controlled lumber drying of 1,500 to 4,000 board feet.
High-quality dehumidification wood kiln for controlled lumber drying of 1,500 to 4,000 board feet.
If you think high quality lumber drying is too complicated or expensive, you’re in for a pleasant surprise with the KD250. Now you can dry your own lumber down to 6-8% moisture content for pennies per board foot. With up to 4,000 board foot capacity, the KD250 includes auxiliary heating, two 16" ( 406.4 mm), 1/4 HP circulating fans, prewired electrical panel, manual over temperature vents, four wood moisture probes, and controls that display temperature and humidity by the most accurate method known with wet bulb and dry bulb sensing.*Chamber not included. Call for details about different chamber options that may fit your needs.
| Drying Capacities | |
|---|---|
| Drying Time | 1,500 BF 4/4 green pine (80% to 8%) in approx. 12 days4,000 BF 4/4 green oak (65% to 8%) in approx. 35 days |
| Load Capacity | 1,500-4,000 bd ft |
| Features & Operation | |
| Auxillary Electric Heat | 4,000 watts |
| Circulating Fans | 2 included: 16” (40 cm) diameter 1/4 hp (0.2 kW) |
| Compressor Nominal HP | 2 HP |
| Internal Blower Motor HP | 1/4 HP (.2kW) |
| Operational Costs | Varies depending upon wood species |
| Over Temperature Vents | Two manual vents included Powered Vent Included |
| Temperature Range | 70°-120°F (20°-50°C) |
| Dimensions & Requirements | |
| Electrical Requirements | 220V / 60Hz Single Phase |
| Height | 37" (.94m) |
| Length | 37 1/2" (.95m) |
| Width | 20 1/2" (.52m) |
Request Info