- Images
- Videos
The EG400 is an industrial twin blade board edger with 30HP electric power, 4” board thickness, 28” max finished board width, and up to 111 fpm feed system.
The EG400 is an industrial twin blade board edger with 30HP electric power, 4” board thickness, 28” max finished board width, and up to 111 fpm feed system.
The EG400 is a rugged board edger that is at home behind industrial headrigs or other applications requiring a fast, accurate heavy-duty board edger. Capable of processing material up to 36" wide and 4" thick, it is equipped with an automatic variable speed feed that is set by the thickness of the piece being edged. The 30HP is powerful enough to rip through thick hardwoods, but not big enough to break your energy budget. Two 16" inserted carbide teeth blades are mounted on a splined shaft and move in and out from center, allowing the use of an optional board tailer. Two lasers are included as standard equipment on the EG400, and it is equipped with anti-kickback protection and other safety features including a perimeter e-stop cable and electrically interlocked safety covers.
The EG400 twin blade board edger is an industrial-level edger that is at home behind industrial sawmills or other applications requiring a fast, accurate heavy-duty board edger. Capable of processing material up to 36" wide and 4" thick into 28” max finished board width, the EG400 is equipped with an automatic variable speed feed that is set by the thickness of the material being edged. The 30HP electric motor is powerful enough to rip through thick hardwoods, but not big enough to break your energy budget. Two adjustable 16" inserted carbide teeth blades are mounted on a splined shaft and move in and out from center, allowing the use of an optional board tailer. Two lasers are included as standard equipment on the EG400, and it is equipped with anti-kickback protection and other safety features including a perimeter e-stop cable and electrically interlocked safety covers.
Anti Kick-Back Fingers
Anti kick-back fingers ensure safe operation.
Board Reverse Function
Stops the blades and reverses the feed rollers to clear jammed boards.
Chain Drive
Heavy duty chain-drive system for long life and low maintenance.
Optional LED 2" Display
Optional 2" Digital LED Readout.
Optional Remote Control
Optional clip on remote control.
Safety Stop
Stops machine from 3 different sides.
Optional Setworks
This option includes both the LED 2" display and remote control.
Two Moveable Blades
Easily access both 16” blades which move in and out from center on a splined shaft.
Two Lasers
Two included standard lasers help to determine correct board position, increasing yield and grade.
Optional Heavy-duty Outfeed Belt
Available with optional 12' heavy-duty outfeed belt. (Also available with an additional 4' extension).
| Power Selections | |
|---|---|
| Power Selections | 30HP (22kW) electric |
| Cutting Capacities | |
| Max Width of Cut | 28" (.72m) |
| Min Width of Cut | 3" (76 mm) |
| Max. Material Thickness | 4" (100 mm) |
| Blade | |
| Blade Speed (RPM) | 2320 RPM |
| Number of Blades | 2 |
| Blade Diameter | 16" (400 mm) |
| Blade Kerf | 9/32" (7 mm) |
| Blade Adjustment Method | Electric |
| Blade position | Two Centered Blades |
| Feed System & Operation | |
| Feed Speed | 4" material: 44 Ft/Min2" material: 78 Ft/Min1" material: 111 Ft/Min |
| Board Reverse System | Reverses feed rollers to eject jams |
| Board Kickback Prevention | Anti Kick-back fingers |
| Board Alignment | 2 Lasers |
| Material Hold-down | Powered Steel Rollers |
| Operator Controls | Stationary Control Station |
| Setworks | Optional Setworks |
| Feed System | Rubber Infeed & Outfeed Belts |
| Options | Heavy-duty outfeed tailer |
| Machine Dimensions & Requirements | |
| Width | 64" (1.6m) |
| Electrical Requirements | 400V 50Hz 3Ph 70A |
| Safety Standards | CE |