Set both sides of your blade at the same time easily with the manual BMT200 toothsetter, which will help you extend your blade’s sharp life and get the most accurate cut of timber. The BMT200 is designed for affordable blade tooth setting. One turn of the crank sets two teeth and moves the blade forward at the same time.
The BMT200 handles 25mm-75mm blades, can set from 13mm to 32mm tooth spacing, and can finely adjust tooth space indexing. The gauge precisely measures the set in each tooth to ensure your tooth set is accurate and ready to cut like a new blade again.
With the dial indicators mounted on each side, the teeth can be set within .001-.002” accuracy.
Blade Height Adjustment Knob
Adjust blades up and down with a single knob from 1-3” (25mm-76mm) width.
Tooth Setter Gauge
Included for consistent and accurate setting.
Clamping Mechanism
Used to prevent any unwanted movement of the blade while indexing and setting.
Blade Height Adjustment Pins
Used for blade capacities of 1-3” (25mm-76mm) width.
Manual Hand Crank
The handle is cranked in a counter clockwise motion to advance the blade and set the teeth. This simple-to-use crank handle sets two teeth per revolution with the same precision and accuracy as the BMT250. The operator must mark the starting position of the blade (weld) and go around the entire blade until this position is reached again.