Blade Guide Idle Side Kit (Part #: A08197) for Wood-Mizer Portable Sawmills
The Blade Guide Idle Side Kit includes mount shaft, bracket, blade guide roller, and fasteners. To get the maximum value out of your Blade Guide Idle Side, periodically check the bearings. Replace your Blade Guide Idle Side when you start to notice flat spots on the rollers, or if the bearings are not spinning freely. Estimated part life is 1,000 hours. In addition to following the maintenance schedule in your manual, the Blade Guide Idle Side Kit will help keep your sawmill in great condition so you can continue to enjoy your Wood-Mizer for years to come!
| REF | PART # | DESCRIPTION | QTY |
| 1 | F05010-15 | Nut, 1/2-20 Hex Nylon Lock | 1 |
| 2 | P04252 | Washer, 5/8" White Felt | 1 |
| 3 | F04254-1 | Ring, 1 1/8" Interior Retaining | 1 |
| 4 | 015975 | Bearing, R8-2RS Blade Guide | 2 |
| 5 | P06455 | Washer, 5/8" Gray Felt | 1 |
| 6 | S04250 | Roller, Flanged Blade Guide | 1 |
| 7 | S04253 | Spacer, Blade Guide | 2 |
| 8 | 036373 | Bolt, Blade Guide Roller | 1 |
| 9 | W08482 | Bracket, Blade Guide Drive Side | 1 |
| 10 | F05007-96 | Screw, 3/8-24 X 1 1/4" Stainless Steel Socket Head Flat Point |
2 |
| 11 | F05010-22 | Nut, 3/8-24 Jam | 2 |
| 12 | S08196 | Shaft, Blade Guide Adjustment | |
| 13 | F05007-95 | SCREW, 3/8-24 X 3/4" STAINLESS STEEL SOCKET HEAD FLAT POINT SET |
3 |
| 14 | F05010-22 | NUT, 3/8-24 JAM | 4 |
| 15 | W08159 | TUBE WELDMENT, BLADE GUIDE MOUNT (Part of saw frame weldment) |
1 |
| 16 | P04252 | Washer, 5/8" White Felt | 1 |
| 17 | F04254-1 | Ring, 1 1/8" Interior Retaining | 1 |
| 18 | 015975 | Bearing, R8-2RS Blade Guide | 2 |
| 19 | P06455 | Washer, 5/8" Gray Felt | 1 |
| 20 | 035411 | Spacer, Blade Guide Bearing | 1 |
| 21 | 035426 | Roller, Flanged Blade Guide Relube | 1 |
| 22 | S08192 | BOLT, BLADE GUIDE ROLLER (RELUBE ONLY) | 1 |
| 23 | P05060 | FITTING, 1/4-28 GREASE (RELUBE ONLY) | 1 |
Request Info