EG400 Industrial Board Edger

Starting at $51,995

The EG400 is an industrial twin blade board edger with 30HP electric power, two moveable 16” carbide-tipped blades, 36” max flitch width, 4” board thickness, 28” max finished board width, and up to 111 fpm feed system.

Extreme, Heavy-duty Edging

The EG400 is a rugged board edger that is at home behind industrial headrigs or other applications requiring a fast, accurate heavy-duty board edger. Capable of processing material up to 36" wide and 4" thick, it is equipped with an automatic variable speed feed that is set by the thickness of the piece being edged. The 30HP is powerful enough to rip through thick hardwoods, but not big enough to break your energy budget. Two 16" inserted carbide teeth blades are mounted on a splined shaft and move in and out from center, allowing the use of an optional board tailer. Two lasers are included as standard equipment on the EG400, and it is equipped with anti-kickback protection and other safety features including a perimeter e-stop cable and electrically interlocked safety covers.


  • Two included standard lasers

  • Two Moveable Blades

  • Safety Stop

  • Built in the USA

Edger Options

LED 2" Display
Remote Control
(includes LED 2" display and remote control)
Tailer with chain belt
Tailer with flat narrow belt
Tailer with flat wide belt
Tailer with flat wide belt 4' extensions

Standard Operation and Features

Two Lasers

Two Lasers
Two included standard lasers help to determine correct board position, increasing yield and grade.

Chain Drive

Chain Drive
Heavy duty chain-drive system for long life and low maintenance.

Anti Kickback Fingers

Anti Kick-Back Fingers
Anti kick-back fingers ensure safe operation.

Board Reverse Function

Board Reverse Function
Stops the blades and reverses the feed rollers to clear jammed boards.

Two Blades

Two Moveable Blades
Easily access both 16” blades which move in and out from center on a splined shaft.

Two Blades

Safety Stop
Stops machine from 3 different sides.


Power 30HP (22.4kW) Elec 460V/60Hz 3Ph
Blade Diameter 16" (400mm) 
Blade Bore 3.5" (89mm) 
Blade Teeth 14 (Inserted)
Blade Kerf 0.28" (7.1mm)
Blade RPM (No Load) 2,239 RPM
Board Length 42" - Unlimited (1m - Unlimited)
Feed Width 36" Max (910mm)
Board Width 3" - 28" (75 - 710mm)
Cut Width 3" - 28" (75 - 710mm)
Board Thickness 1" - 4" (25 - 100mm)
Feed Speed 4" material: 44 Ft/Min
2" material: 78 Ft/Min
1" material: 111 Ft/Min
Feed Motor Horsepower 2HP (1.5 kW)
 Due to many variables, feed speed will vary
Length 12' 5" (3.8m)
Width 5' 3" (1.6m)
Height 6' 10" (2.1m)
Infeed Table Height 2' 4" - 3' (710 - 910mm) Adj.
Infeed Table Length 8' (2.4m)
Weight 3,750 lbs (1,700 kg)

Request Info