Options and Accessories

LT15 ProPackage

Includes anti-rollback log loading ramps, cant hook and log taper wedge.



LT15 ProPackage

LogRite Cant Hook Package

Includes anti-rollback log loading ramps, cant hook and log taper wedge.



LogRite Cant Hook Package

Log Deck Package

(Items can be ordered separately.) Make your operation a one-man show. (LT28, LT35 Manual & LT40 Manual)

 

 

Manual Winch
The manual winch allows a single operator to load logs weighing several thousand pounds onto the bed and is used with the manual log turner to rotate logs.

Toeboards
Mounted on the sawmill bed’s front and rear cross members, the toeboards enable you to lift either end of a tapered log by hand crank.

Log Turner
This simple accessory, when used in conjunction with the manual winch, enables a single operator to rotate larger diameter logs.

 

 



Log Deck Package

Board Return

The Manual Board Return expedites off-bearing with the help of board-grabbing arm. Available on LT40 Manual or Hydraulic models built in 1997 or later.

(Standard on LT40 Super Hydraulic.)



Board Return


Hydraulic Log Loading Kit

(Items can be ordered separately.)

Automatically load and turn logs on your sawmill while you watch! (LT35 Manual & LT40 Manual)

 

 
   

Hydraulic Controls 

 

Hydraulic Loading Arm 

 

Hydraulic Log Turner 


(Factory installed on new mills. Call for pricing on field installation.)



Hydraulic Log Loading Kit

Operator Seat

Even the hardest-working sawyers like to rest their feet once in a while. That’s why we designed this soft, contoured seat to be easily installed on our mills. When you want to take a break, you can quickly add the operator seat and be back to sawing within minutes. 

(Reduces maximum log length by 25". Easily removed for full-size logs. LT40 Manual-LT70) 




Operator Seat

SimpleSet Setworks

This setworks option quickly and accurately controls your blade height. Includes two stored presets and is easily adjusted to any thickness.

(Optional on LT40 Manual, Standard on LT40 Hydraulic.) 

 



SimpleSet Setworks

Outriggers

Order just one or a whole set of six for easy and precise bed adjustment even in the most uneven setup. Call for details and recommendations.

(LT28-LT70) 



Outriggers


LubeMizer Lubrication System

The LubeMizer® system helps melt away sap that can slow down sawing. It features an adjustable electronic flow controller & pump that applies a special lubricating solution to both sides of the blade.

(Available as an option on new Wood-Mizer mills, and as a retrofit for non-remote, 12-volt mills built after April 1997.)




LubeMizer Lubrication System

Debarker

Keep debris away from your blades without the hassle of power-washing. The Wood-Mizer Debarker blade clears a ¼" wide path in front of where the blade enters the cut, protecting your blades from damage. The Debarker’s ¾HP motor helps extend blade life between sharpenings, as well as extending overall blade life. (Standard on LT70 sawmills.)


     

LT40 - LT70 Debarker

 

LT35 Debarker

 



Debarker

LaserSight

LaserSight acts as a second pair of eyes. Ideal for indoor sawmill setups, this laser beam pinpoints the precise location where the blade will hit the log, reducing slabs and increasing yield. 

(LaserSight may be retrofitted to any Wood-Mizer mill equipped with a 12-V battery. Not recommended for use in direct sunlight.)

 

 



LaserSight

Wireless Head Control

With this unit, sawyers operate the up/down, forward/reverse, blade guide arm, debarker, and autoclutch head controls from any practical viewing distance around the mill; ensuring the best view of the work area. The remote is designed to be worn either around the waist or with the standard break-away shoulder strap; placing the joystick and toggle controls at the user’s fingertips.

 

 



Wireless Head Control


Accuset 2 Setworks

Offers more features and benefits than any setworks option in the industry. Convenience and accuracy at your fingertips.

 

Manual Mode — allows you to operate the mill as usual and displays the blade height setting. 

Auto-Down Mode — references the current blade height and allows you to select preset increments to move the blade down. Up to 16 settings can be selected and stored. 

Auto-Up Mode — Ideal for raising the sawhead when large incremental cuts are needed. 

Pattern Mode — program up to 16 different sawing increments measured from the bed up. 

Reference Mode — program four pre-set vertical locations of the sawhead travel. 

On Board Diagnostics — continually monitors operation. 

Built-in Bypass — when manual head adjustments are needed or desired.




Accuset 2 Setworks

Command Control

The Command Control puts you at a fixed location at the front of the mill and gives you the ability to control all head and hydraulic bed functions. Allowing you to sit or stand, this all-in-one operator station sends signals to the sawmill so each cut and log rotation is effortless.

This option is available for LT40 Hydraulics with SimpleSet Setworks and LT40 Super Hydraulic and LT50 models with Accuset® 2 Setworks. Also available on the LT70 which includes a pedestal allowing you to move the command control anywhere within 6’ around the sawmill. This option is limited to a 6’ bed extension on LT40, LT50 and LT70 models.





Command Control

LT10/LT15 Log Clamp

Easily positioned, zinc plated clamp for securing log.

(Retrofit option for older LT10 and LT15 models)



LT10/LT15 Log Clamp

Auto Clutch

With the flick of a switch, engage the clutch and rev up the engine on your sawmill. Flip the switch in the other direction, and the
blade will stop as the engine returns to idle. It’s that simple.
(Now standard on new LT40 Hydraulic-LT70 sawmills.)



Auto Clutch


LT70 Wide Head

Cut logs up to 40" (1m) in diameter with the LT70 Wide Head option.
(only available on new mill purchases)



LT70 Wide Head

LT70 DCS Control

 Moveable up to 10 feet around the mill, includes joystick, controls, and stand.
(Only available with new mill purchase)



LT70 DCS Control