The EG400 is an industrial twin blade board edger with 30HP electric power, two moveable 16” carbide-tipped blades, 36” max flitch width, 4” board thickness, 28” max finished board width, and up to 111 fpm feed system.
The EG400 is a rugged board edger that is at home behind industrial headrigs or other applications
requiring a fast, accurate heavy-duty board edger. Capable of processing material up to 36" wide
and 4" thick, it is equipped with an automatic variable speed feed that is set by the thickness of
the piece being edged. The 30HP is powerful enough to rip through thick hardwoods, but not big
enough to break your energy budget. Two 16" inserted carbide teeth blades are mounted on a
splined shaft and move in and out from center, allowing the use of an optional board tailer. Two
lasers are included as standard equipment on the EG400, and it is equipped with anti-kickback
protection and other safety features including a perimeter e-stop cable and electrically interlocked
Two included standard
lasers help to determine
correct board position,
increasing yield and grade.
Heavy duty chain-drive
system for long life and
Anti kick-back fingers
ensure safe operation.
Stops the blades and
reverses the feed rollers
to clear jammed boards.
Easily access both 16”
blades which move in
and out from center on
a splined shaft.
Stops machine from 3 different sides.
Honey Grove Hardwoods improved efficiency, yield, and profits by installing a complete Wood-Mizer system including an EG400 Edger. Read Their Story