The EA3000 Automated Edger uses optical scanning technology to achieve high precision and low waste edging of boards. The entire edging process is automated with each board being positioned and then scanned.
- 2 Circular Blades. 1 Adjustable Blade.
The EA3000 Automated Edger uses optical scanning technology to achieve high precision and low waste edging of boards. The entire edging process is automated with each board being positioned and then scanned. The profile of each board is analyzed by a computer, which decides on the best product to maximize recovery. Decisions are based on both volume recovery and product value.
The V-AE is capable of handling up to 12 boards per minute at 6.7m (22') or 15 boards per minute at 3.4m (11'). It is the ideal machine to edge boards coming from the Industrial Resaw. Electric servo sizing system achieves any width of cut without complication.
Parallel PLC / computer control systems allow the machine to be switched over to manual mode with a single button. Online support allows our technicians to dial into your machine to troubleshoot it remotely.
Overall, the EA3000 Automated Edger is a simple, robust and automated solution to your edging needs.
Features
- Optical scanning on the run
- Short footprint
- Can be fed from both sides
- Unscrambler and infeed included
- Easy to use windows interface
- Mechanised material handling for fast, accurate board alignment
| Power Selections | |
|---|---|
| Power Selections | 30kW (40HP) electric 45kW (60HP) electric |
| Cutting Capacities | |
| Min Width of Cut | 40 mm (1.5”) |
| Max. Material Thickness | 75mm (3") |
| Production Rate | 1-25 boards/min (average) |
| Blade | |
| Number of Blades | 2 |
| Blade Diameter | 450 mm (17 1/2") |
| Blade Kerf | 5 mm (0.195”) |
| Blade Adjustment Method | Electric Servo |
| Blade position | Two Centered Blades |
| Feed System & Operation | |
| Feed Speed | 150 - 250m/min (500 - 820ft/min) |
| Board Alignment | Automated mechanical board alignment |
| Material Hold-down | Powered Pneumatic Roller Hold-downs |
| Feed Motor | 11kW (15HP) |
| Scanning | Optical Material Scanner System |
| Operator Controls | Stationary Control Station |
| Options | In-line or transverse board scanning |