Smart Log Processing System

The Smart Log Processing System (SLP) is a flexible series of modular products designed for the profitable conversion of 4" to 16" diameter logs into boards, battens, and pallet wood. Although there are many configurations and setups, a typical layout consists of one or more TVS units (Twin Vertical Saw), SVS units (Single Vertical Saw), Horizontal Resaw and an EG300 edger. With hundreds of individual units and systems running worldwide, the SLP line sets the standard for processing small and medium logs for profit.


Material Handling

Wood-Mizer Log Ramp

Log Ramp

Designed to make loading the log deck with a forklift easier and more efficient. It also increases log capacity on the deck, minimizing loading runs.

Wood-Mizer Log Incline Deck

Log Incline Deck

The Log Incline Deck has been designed to bring the logs up to the operator station in a controlled manner, allowing the operator to concentrate on log alignment and continuous feeding into the TVS.

Wood-Mizer Log Deck 3 Strand

Log Deck - 3 Strand

To keep your smart log line supplied with timber, you need a robust log infeed system. Our log decks are designed to withstand the rigors of the forestry industry. Massively constructed, our log decks will give years of service in a very demanding environment.

Wood-Mizer Log Deck 2 Strand

Log Deck - 2 Strand

To keep your smart log line supplied with timber, you need a robust log infeed system. Our log decks are designed to withstand the rigors of the forestry industry. Massively constructed, our log decks will give years of service in a very demanding environment.


Wood-Mizer Idle Roller Table

Idle Roller Table

The Idle Roller Table fits inline for the straight flow of material. The study table facilitates moving product from one area to the next within the system. It is adjustable in height to accommodate a variety of set ups.
Wood-Mizer Cross Roller Table

Cross Roller Table

The Cross Roller Table is a simple, heavy-duty table for cross transferring sawn boards back into the material flow for additional processing including resawing and edging.
Wood-Mizer Cross Transfer Deck

Cross Transfer Deck

We know that every sawmill is different, and that’s why we made our transfer deck modular. Order a drive end module and an idle end module and then as many extension modules as you need for your layout. Increase or decrease the length of the conveyor, or the height/slope of the conveyor to suit your needs.
 
Twin Vertical Saw

A typical layout consists of one or more TVS units which takes two sides off a log and then passes the two-sided cant on to the SVS (Single Vertical Saw).

Wood-Mizer Twin Vertical Saw

Wood-Mizer Single Vertical Saw

With a simple, but effective infeed system the SVS will make light work of splitting or removing the third side from the two sided cant coming from the TVS.

Wood-Mizer Single Vertical Saw

HR500 Resaw

The slabs from the TVS and the SVS can then be passed to the slab reclaim line which consists of a Horizontal Resaw.

Wood-Mizer HR500 Resaw

EG300 Edger

EG300 Multi-Rip Edger standardizes up to three board sizes for maximum timber recovery. The EG300 is the ideal companion for the Wood-Mizer Industrial SLP line.

Wood-Mizer EG300 Edger

Sample Layout

Wood-Mizer Smart Log Processing Illustration