KD250 Dehumidification Lumber Kiln

High-quality dehumidification wood kiln for controlled lumber drying of 1,500 to 4,000 board feet. *Chamber not included.

Unbeatable Quality, Easy to Operate

If you think high quality lumber drying is too complicated or expensive, you’re in for a pleasant surprise with the KD250.* Now you can dry your own lumber down to 6-8% moisture content for pennies per board foot. With up to 4,000 board foot capacity, the KD250 includes auxiliary heating, two 406mm, 0.1864kW circulating fans, prewired electrical panel, manual over temperature vents, four wood moisture probes, and controls that display temperature and humidity by the most accurate method known with wet bulb and dry bulb sensing.

Specifications

Capacity:   1,500 - 4,000 bd.ft.
Temp Range:  70° -120°F
Drying Time: 1,500 BF 4/4 green pine (80% to 8%) in approx. 12 days
4,000 BF 4/4 green oak (65% to 8%) in approx. 35 days
Electrical Requirements: 220V / 60Hz Single Phase
Warranty: 1 year Limited

Request Info

 

Kiln Diagram